Cars

Description

AFR which is the abbreviated name for Air-Fuel-Ratio is the ratio representation of air and fuel during incineration in a vehicle. The oxygen sensors are used for the duration of this process to determine whether the ratio is considered rich or lean. The oxygen sensors however does not give the ratio on its own as the sensor cannot be placed directly in the exhaust stream, therefore they are unable to provide a concise measurement of the fuel or the air flowing into the engine. The data that is gathered from the oxygen sensor is usually combined with data supplied from other sources and can then be used to determine the AFR.
I decided to do a review on the parking dynamics sensors for people that are not sure about buying them. In this review I will explain what parking dynamics sensors are, what they do and how well they perform.
https://www.bransloadcell.com/html/en/multiaxissensor/6axis/818.html
Firstly parking dynamics are parking sensors for your car that beep when you move near obstacles, they can not be seen after they have been fitted and require no drilling. They are electromagnetic sensors, the other category of sensors are ultrasonic. Ultrasonic however require drilling in your car.

The parking dynamics sensor creates an electromagnetic field around the front or rear of your car even onto the sides of the vehicle. It detects all objects within 3 feet of the bumper and starts to signal instantly via series of audible tones.
https://www.bransloadcell.com/html/en/products/tensionandcompressionload...
At first I was skeptical of ordering online but who isn't? I found the parking dynamics website easy enough to use and I didn't have any security issues. parking dynamics also offer a 30 day money back guarantee which I thought might have came handy but turns out that I won't need it. I ordered two sensors, the pd1 rear sensor and front sensor for my peugeot 206 and it arrived within 5 days which wasn't bad but maybe could have been a bit faster.

The sensors work by placing an antenna inside your bumper this then links to the ecu and speaker which makes the beeping sound. It is actually quite simple to install and only took me about an hour for each one at the max.

I've had the sensors for a couple of weeks now and so far they are working fine, fingers crossed. I decided to get them because I've past my test not that long ago and I'm terrible at parking. I'm trying to think of a fault with the parking dynamics sensors but can't really, maybe I will find one after I've been using them more.

https://www.bransloadcell.com/html/en/piezoelectricsensor/

Though there are instances of using motion sensors in advanced car security systems, the best use is always for home and shop security. One of the best ways for warding off unwanted intruders from the property, the system can also be used to welcome guests who are fumbling to find out the front entrance or passage.

There is a light and dark side of everything as you can see.

* Also, you don't have to spend a lot of money in order to get these sensors. In fact, there are some sites where these sensors are available at the most competitive rates.